{ "id": "shower-filter", "sku": "shower-filter", "title": "Multi-Stage Shower Filter (2 Cartridges)", "slug": "shower-filter", "price": 90.99, "currency": "NZD", "availability": "in_stock", "category": "water-filters", "category_label": "Water Filters", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": null, "images": [ "https://myhomeimprovement.co.nz/dropship-images/water-filters/shower-filter/main-shower-filter.jpg", "https://myhomeimprovement.co.nz/dropship-images/water-filters/shower-filter/shower-filter-2.jpg", "https://myhomeimprovement.co.nz/dropship-images/water-filters/shower-filter/shower-filter-3.jpg", "https://myhomeimprovement.co.nz/dropship-images/water-filters/shower-filter/shower-filter-4.jpg" ], "description_short": "Multi-stage filter media designed to reduce chlorine taste and odour and sediment, a universal fitting that suits wall-mounted, handheld and rainfall shower heads, and two cartridges in the box so your next change is already sorted.", "description": "The smell you notice for about five seconds\n\nTurn on a shower that has not been used for a day or two and there is often a faint whiff in the first burst of water. Most people register it, shrug, and get on with the shower. That smell is usually chlorine, which is in mains water because water authorities use it to keep supply lines in order on the way to your house. It does its job in the pipes, then arrives at your bathroom still doing it.\n\nA shower filter is a small answer to a small annoyance. It is a plastic housing, about 9 cm across and 19.5 cm tall in this case, that threads in between your water outlet and your shower head. Water goes through layered media on the way past. The media is designed to reduce chlorine taste and odour and sediment. That is the whole job description, and anyone telling you a shower filter does dramatically more than that is selling rather than explaining.\n\nHow an inline filter actually works\n\nThe word \"inline\" is doing the heavy lifting here. Instead of a filter built into a shower head, which forces you to use that head and no other, an inline unit sits in the line. Your existing head screws onto the bottom of it. Water from the wall enters the top, passes down through the cartridge, and comes out into whatever head you already own.\n\nThat design choice matters more than it sounds. Plenty of people have spent real money on a rainfall head or a handheld unit with the spray settings they like. Being told to swap it for a filter-head combo with mediocre spray is a hard sell. An inline filter sidesteps the argument entirely.\n\nInside the housing is a cartridge. The media inside is arranged in layers so water contacts different materials as it passes. Over time, that media loads up with what it has caught. That is normal and it is also the reason cartridges are consumable rather than permanent. A filter that is never changed slowly becomes a plastic spacer in your plumbing.\n\nThis particular pack includes two cartridges. It is a small detail that quietly solves the most common failure point for any filter product, which is that people forget to buy the next one.\n\nWho it suits\n\nRenters. This is probably the single best case for an inline shower filter. Nothing is cut, nothing is permanent, and nothing in the bathroom is modified in a way a landlord would mind. When you move, you unscrew it, put the original head back on the arm, and take the filter with you. Keep the original washer in a drawer and the whole thing reverses in a few minutes.\n\nPeople who have just moved into an older place. Older pipework can carry more sediment, especially in the first weeks of use after a vacancy or after work on the street supply. A filter designed to reduce sediment is a sensible precaution for a shower in a house whose plumbing history you do not know.\n\nPeople fed up with cleaning shower screens. Sediment that comes through the head ends up on the glass, the tiles and the tray. Catching some of it upstream means less of it settling downstream.\n\nAnyone who just does not like the smell. This is a valid reason on its own. You shower every day. If the water smells better, the shower is better. You do not need a more elaborate justification than that.\n\nWho it does not suit: anyone on tank, bore or untreated supply. This is a point-of-use filter for drinkable mains water. It is not a treatment system, and it does not turn water of unknown quality into water you should be using. That is a bigger job with different equipment.\n\nWorking out whether it will fit\n\nCompatibility for this unit is listed as wall-mounted, handheld, rainfall and combo heads, which covers the vast majority of home bathrooms. Still, five minutes of looking before you order saves a return later.\n\nStart with space. The housing is about 19.5 cm tall. If you have a wall-mounted arm, that height gets added between the wall and the head, which usually pushes the head down and slightly out. In a standard recess this is fine. In a very low shower, or under a ceiling-mounted rainfall arm with little clearance, stand in the shower and hold your hand roughly 20 cm below the head. If that position is awkward for you, think again or consider moving the filter to a different point in the line.\n\nNext, check your fitting. Most domestic shower connections are standard, but if your head is a proprietary unit, a built-in mixer, or something a previous owner improvised, have a proper look at the thread first. Thread sizes are not specified by the maker, so if your setup looks unusual, that is worth confirming.\n\nFinally, check the head comes off. On a shower that has not been touched in ten years, the head can be welded in place by mineral build-up. Wrap a cloth around the fitting and use pliers over the cloth so you do not mark the chrome. If it will not budge with reasonable effort, stop and get a plumber rather than twisting a fixed pipe in the wall.\n\nFitting it\n\nThe sequence is simple. Turn off the water at the shower taps. Unscrew the old head and set it aside with its washer. Wrap a few turns of plumbing tape clockwise around the threads on the shower arm. Screw the filter on and hand-tighten firmly. Tape the filter's outlet threads, screw the head onto the bottom of the filter, and tighten.\n\nThen turn the water on and run it for a bit before anyone gets in. Watch the two joints for drips. A small weep usually means the tape needs redoing rather than more force. Plastic threads do not respond well to being cranked down hard, and you can crack a housing that way.\n\nPay attention to flow direction. Inline filters generally have an inlet and an outlet, and running one backwards reduces how well the media works. Look for an arrow or marking on the housing before you commit.\n\nLooking after it\n\nMaintenance is mostly about the cartridge. Replace it on the maker's schedule. If your water is carrying a lot of sediment, it will need doing more often than that. The most reliable real-world signal is flow, when the shower starts feeling weaker than it did and nothing else has changed, the cartridge is usually the culprit.\n\nChanging it means turning the water off, opening the housing, swapping the cartridge and resealing. Run the shower for a short while afterwards before a normal use. With two cartridges in the pack, your first change needs nothing but five minutes.\n\nFor the housing itself, wipe it with a soft damp cloth. Rinse away any sediment on the outside with clean water. Skip scourers and strong bathroom chemicals, both of which will haze or scratch plastic over time. If the unit ever comes off for any reason, give the threads a quick look and reapply fresh tape rather than reusing old.\n\nThe short version\n\nAn inline shower filter is a modest, reversible upgrade. It threads in between your outlet and your existing head, so you keep the shower head you like. The media inside is designed to reduce chlorine taste and odour and sediment in drinkable mains water, and the housing is a compact plastic unit measuring about 9 by 9 by 19.5 cm.\n\nTwo cartridges in the box means your first replacement is already sorted, which is the single best predictor of whether a filter keeps working a year from now. Check your clearance and your fitting before ordering, use plumbing tape on the threads, keep an eye on flow, and change the cartridge when it is due.\n\nIt will not transform your life. It will make one part of your day slightly better every single day, which over a year adds up to a reasonable return on a small bit of plastic.", "llm_summary": "This is an inline shower filter that fits between a shower water outlet and the existing shower head. The pack contains two shower filter cartridges. The filter housing measures 9 cm deep by 9 cm wide by 19.5 cm high and is made from plastic. The maker lists it as compatible with wall-mounted, handheld, rainfall and combo shower heads and describes it as easy to install. The filter media is designed to reduce chlorine taste and odour and sediment in drinkable mains (town) water. Cartridges need replacing on the maker's schedule. Sold online by Home Improvement Company (myhomeimprovement.co.nz) at $90.99 NZD. Delivery: New Zealand wide, free over $90, express $25, up to 7 working days in transit, after dispatch within 2 working days. Returns: 15 days, unused and in original packaging, plus your rights under the Consumer Guarantees Act 1993.", "returnable": true, "return_policy": "This store's own change-of-mind window is 15 days from delivery on an unused item in its original packaging with proof of purchase; the customer pays the tracked return postage and no handling or restocking fee applies; direct exchanges are not offered. New Zealand has no statutory cooling-off period for an ordinary online purchase, so that window is the store's policy rather than a legal right. Separately, the consumer guarantees under the Consumer Guarantees Act 1993, Schedule 2 to the Fair Trading Act 1986, apply to every sale, cannot be excluded, and cover faulty, damaged or misdescribed goods at the store's cost including return postage.", "shipping_profile": "standard", "warranty": null, "brand": "Home Improvement Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://myhomeimprovement.co.nz/shower-filter", "canonical_url": "https://myhomeimprovement.co.nz/shower-filter", "json_url": "https://myhomeimprovement.co.nz/api/products/shower-filter.json", "updated_at": "2026-11-11", "compare_at_price": 108.99 }